KANEX Dry Chemical Powder Cartridge Operated Fire Extinguishers are specially designed for high performance and to achieve rapid Fire knock down capability. Cartridge-operated means increased reliability, on-the-spot recharge, ease of service, and superior performance. These portable extinguishers are suited for industrial, commercial and Domestic Fire protection needs.
Dry Powder Cartridge Operated Fire Extinguishers Filled with specially fluidized and siliconized mono ammonium phosphate dry chemical with MAP 90% as per standard requirements. It chemically insulates Class A fires by melting at approximately 350°F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator.
A simple squeezing mechanism type brass nickel plated Valve with Auto Safety Pressure release and large loop Stainless steel Pull pin.
Superior grade EPDM rubber is far more flexible than the normal rubber used in most hosepipes. It is also far less prone to cracks.
Extinguisher shells are 100% factory hydro tested to excess of 35 bar under the vigilance of Engineers.
Specially fluidized and Siliconized mono ammonium phosphate dry chemical with MAP 90% as per standard requirements. It chemically insulates Class A fires by melting at approximately 350°F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires
for easy traceability of Fire Extinguishers.
Each Kanex fire extinguishers having standard certifications of ISO 9001 and BIS Approval (IS 15683:2006).
Tough Exterior and Interior Coating with Pure Polyester (PP) powder/ PVC coating in HQ series, which is tested for higher impact resistivity and flexibility.
KFDRQ4 (MAP 90%)
KFDRQ6 (MAP 90%)
KFDRQ9 (MAP 90%)
The products specified in this website are subjected to continuous development and improvement and are subject to alterations without prior notice.