KANEX Dry Chemical Powder Stored Pressure Fire Extinguishers (ABC Dry Powder Fire Extinguisher) are specially designed for high performance and to achieve rapid Fire knock down capability for protection of light ordinary and high Hazards. These compact and portable extinguishers are suited for industrial, commercial and Domestic Fire protection needs.
Dry Powder Stored Pressure Fire Extinguishers filled with specially fluidized and silicon zed mono ammonium phosphate dry chemical with MAP 50% as per standard requirements. It chemically insulates Class A fires by melting at approximately 350°F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator.
A simple squeezing mechanism type brass nickel plated Valve with Easy snap Lever lock safety seal and large loop Stainless steel Pull pin.
Easy to read Pressure gauges with Unique Gauge Testing System (UGTS) to check the workability and accuracy onsite for each gauges.
Superior grade EPDM rubber is far more flexible than the normal rubber used in most hosepipes. It is also far less prone to cracks.
Extinguisher shells are 100% factory hydro tested to excess of 35 bar under the witness of quality supervisors.
Specially fluidized and siliconized mono ammonium phosphate dry chemical with MAP 50% as per standard requirements. It chemically insulates Class A fires by melting at approximately 175°C and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires
Each Kanex fire extinguishers having standard certifications of ISO 9001 and BIS Approval (IS 15683:2006).
Tough Exterior and Interior Coating with Pure Polyester (PP) powder/ PVC coating in HQ series, which is tested for higher impact resistivity and flexibility.
The products specified in this website are subjected to continuous development and improvement and are subject to alterations without prior notice.